[j-nsp] Juniper SDX-300 (interoperability with thrid party products like Cisco)

[P.Narayana Swamy]

Well it is not automatic, you need to write lines of
script to adapt to the CLI of the third party device.(
as mentioned in the link)  :(

Swamy.

--- Bjørn Mork <bjorn at mork.no> wrote:

> "P.Narayana Swamy" <pnswamy2 at yahoo.com> writes:
> 
> >  Though, the SDX-300 supports COPS / BEEP
> sessions, It
> > can support only JunosE and Junos ( Both ERX and
> > M-series). Eventhough the controlling session is
> COPS,
> > the Command line are different for other vendors.
> 
> It can be used, in theory, to manage other routers
> using SNMP and/or CLI:
>
http://www.juniper.net/techpubs/software/management/src/src20x/sw-sdx-integration/html/network-devices-cli.html
> 
> But I've never fealt like trying to do that...
> 
> 
> 
> Bjørn
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ