[j-nsp] FPC high CPU and Interrupts

[Boyd, Benjamin R]

I've seen it a few times, a process like BGP or sshd will get hung.
Have you tried a 'top' from the shell (from cli type 'start shell') to
see what process is causing this?

  
Thanks, 
Ben Boyd, JNCIS 
Network Analyst II        | benjamin.r.boyd at windstream.com 
Data-Network Operations   | (866)366-2911x2 (Ops) 
Windstream Communications | (501)748-0790 (Desk)
 

>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net 
>[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Doan Nguyen
>Sent: Thursday, April 24, 2008 8:17 AM
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] FPC high CPU and Interrupts
>
>Hi,
>
>has anyone seen where your FPC has a constantly high CPU and 
>interrupt?  If so what could be causing this?
>
>thanks,
>-Doan
>
>       
>---------------------------------
>Be a better friend, newshound, and know-it-all with Yahoo! 
>Mobile.  Try it now.
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/juniper-nsp
>

***************************************************************************************

The information contained in this message, including attachments, may contain 
privileged or confidential information that is intended to be delivered only to the 
person identified above. If you are not the intended recipient, or the person 
responsible for delivering this message to the intended recipient, Windstream requests 
that you immediately notify the sender and asks that you do not read the message or its 
attachments, and that you delete them without copying or sending them to anyone else.