[j-nsp] LDP Session over GRE Tunnel

[Farhan Jaffer]

Is there any way to adjust MTU on tunnel OR we have to do on source
interface only? I don't find any option in juniper on tunnel
interfaces.

On Tue, Aug 26, 2008 at 8:48 AM, Farhan Jaffer <bandhani at gmail.com> wrote:
> Yes exactly Masood. But if LDP won't work i am not able to do
> anything. And it's not working. If the MTU size is mismatch OR less
> than 1500, LDP session establish or not? There is no ACL / prefix list
> in b/w.
>
>
> On Mon, Aug 25, 2008 at 9:44 PM, Masood Ahmad Shah
> <masood at nexlinx.net.pk> wrote:
>> Yea you can have established LSP without LDP. Guess how :)
>>
>> What if you are running both LDP and RSVP... ;)
>>
>>
>>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Junaid
>> Sent: Monday, August 25, 2008 8:35 PM
>> To: Farhan Jaffer
>> Cc: Juniper Puck
>> Subject: Re: [j-nsp] LDP Session over GRE Tunnel
>>
>> Hi,
>>
>> Check the transport addresses used by LDP on both nodes. These
>> addresses should be reachable via IGP or static routes over the GRE.
>> It is surprising that LSP is established without LDP!
>>
>>
>> Regards,
>> Junaid
>>
>>
>> On Mon, Aug 25, 2008 at 8:05 PM, Farhan Jaffer <bandhani at gmail.com> wrote:
>>> Hi,
>>>
>>> I am testing connectivity over GRE tunnel, IBGP session is
>>> established, LSP is also established, however LDP session is not going
>>> to establish. Any idea?
>>>
>>> FJ
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>