[j-nsp] RE : flow export

[david.roy at orange-ftgroup.com]

Hi,
Try to create the filter at the "firewall family inet" hierarchy level. For IPV4 we can create filter at either "firewall" or "firewall family inet" hierarchy level but I don't know if there is some requierements for sampling filter. 
 
David
 

________________________________

De: juniper-nsp-bounces at puck.nether.net de la part de Bernard Kwofie
Date: mer. 03/12/2008 20:08
À: juniper-nsp at puck.nether.net
Objet : [j-nsp] flow export



Hi,
 I am trying to export flow data from my M10i to a linux box for nfsen to graph, but its not working. Can anybody help me out.  Thank you in advance.    Below is my configuration

interfaces {
    so-0/0/0 {
        unit 0 {
            family inet {
                filter {
                    input all;
                    output all;
                }
                address x.x.x.x/24;
            }
        }
    }
firewall {
    filter all {
        term all {
            then {
                sample;
                accept;
            }
        }
    }
}
forwarding-options {
    sampling {
        input {
            family inet {
                rate 100;
            }
        }
        output {
            cflowd x.x.x.x {
                port 9996;
                version 5;
            }
        }
    }
}

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp




*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************