[j-nsp] Juniper uRPF implementation

[Mark Tinka]

On Sunday 07 December 2008 05:41:19 Diogo Montagner wrote:

> I think it is based on forwarding plane because when you
> configure uRPF on a multi-homed environment you need
> issue the command "set routing-options forwarding-table
> unicast-reverse-path feasible-paths". You can find this
> on JNCIS-M study guide. But there is no mention about
> default route. I think you cannot use uRPF with only a
> default route.

This topic was discussed in much detail, here:

http://markmail.org/message/47d2bspl4x2enr4d

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20081207/785fb40e/attachment.bin>