[j-nsp] dymanic interfaces junose

[=?iso-2022-jp?B?GyRCQCVFRCEhODU1JBsoQg==?=]

Hello

Maybe...
The reason why the interface cannot be deleted is that "Dormant" interface remains. 

>#show vlan subinterface
>                                          Svlan Vlan Ether
>         Interface           Status  MTU   Id    Id  type   Type
>---------------------------- ------- ---- ----- ---- ----- -------
>lag 16/0.11                  Dormant 1522  ----   11  ---- Dynamic
>lag 16/0.13                  Dormant 1522  ----   13  ---- Dynamic
>2 vlan subinterfaces found


It is possible to delete it according to the following procedures. 

>#conf t
>Enter configuration commands, one per line.  End with ^Z.
>#int lag16/0.11
>#shutdown
>#int lag16/0.13
>#shutdown
>#end
>#show vlan subinterface
>                                        Svlan Vlan Ether
>         Interface           Status MTU   Id    Id  type   Type
>---------------------------- ------ ---- ----- ---- ----- ------
>0 vlan subinterfaces found
>
>#conf t
>#interface lag 16/0
>#no vlan bulk-config "TEST-RANGE" vlan-range 10 19


---------------
Motoki Seta