[j-nsp] dymanic interfaces junose

[fatih ayvaz]

Hello,

I agree with Motoki. If you have a few interfaces, you can switch to configure mode and shutdown your dormant subinterfaces just like configuring a static subinterface. Otherwise, you need to shutdown your major interface.

Regards.
Fatih

--- On Mon, 12/22/08, Motoki$B!!(BSeta <m-seta at enecom.co.jp> wrote:
From: Motoki$B!!(BSeta <m-seta at enecom.co.jp>
Subject: Re: [j-nsp] dymanic interfaces junose
To: juniper-nsp at puck.nether.net
Date: Monday, December 22, 2008, 5:19 AM

Hello

Maybe...
The reason why the interface cannot be deleted is that "Dormant"
interface remains. 

>#show vlan subinterface
>                                          Svlan Vlan Ether
>         Interface           Status  MTU   Id    Id  type   Type
>---------------------------- ------- ---- ----- ---- ----- -------
>lag 16/0.11                  Dormant 1522  ----   11  ---- Dynamic
>lag 16/0.13                  Dormant 1522  ----   13  ---- Dynamic
>2 vlan subinterfaces found


It is possible to delete it according to the following procedures. 

>#conf t
>Enter configuration commands, one per line.  End with ^Z.
>#int lag16/0.11
>#shutdown
>#int lag16/0.13
>#shutdown
>#end
>#show vlan subinterface
>                                        Svlan Vlan Ether
>         Interface           Status MTU   Id    Id  type   Type
>---------------------------- ------ ---- ----- ---- ----- ------
>0 vlan subinterfaces found
>
>#conf t
>#interface lag 16/0
>#no vlan bulk-config "TEST-RANGE" vlan-range 10 19


---------------
Motoki Seta


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp