[j-nsp] JUNOS : prefix-list

[Samuel]

No it is not possible.
For this use there are the route-filter.

Regards,
Samuel

Amos Rosenboim a écrit :
> Hi List,
>
> This reminds me:
> Is it possible to have different match type for each different line in 
> the prefix-list (similar to the Cisco implementation)?
>
> Amos
>
> On Feb 7, 2008, at 2:33 PM, Samuel wrote:
>
>> Hi Jonathan,
>>
>>> Regarding the default behavior in firewall filters, there is no way
>>> you can have an 'exact' match, since all source addresses are /32s by
>>> definition.  Therefore, the behavior of matching all addresses within
>>> the prefix is the only reasonable behavior.
>>>
>> Yes it's right.
>>> And, you can actually apply different match types to prefix lists in
>>> routing policy now.  Use the 'prefix-list-filter' configuration
>>> statement.
>>>
>>> For example:
>>>
>>> [edit policy-options policy-statement example term example]
>>> lab at HongKong# set from prefix-list-filter internal-routes ?
>>> Possible completions:
>>>   exact                Exactly match the prefix length
>>>   longer               Mask is greater than the prefix length
>>>   orlonger             Mask is greater than or equal to the prefix 
>>> length
>>>
>> Thanks for this tip!
>>
>> Regards,
>> Samuel
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>