[j-nsp] Juniper M10i n00b question

[Hyunseog Ryu]

Did you check "request system reboot" command ?

Hyun

Hyunseog Ryu
Senior Network Engineer
Norlight , Inc. 
Applications Engineering
13935 Bishops Drive
Brookfield, WI 53005 
Phone. +1-262-792-7965
Fax. +1-262-792-7733
Email. hryu at norlight.com




Chris <behrnetworks at gmail.com> 
Sent by: juniper-nsp-bounces at puck.nether.net
01/07/2008 02:41 PM

To
juniper-nsp at puck.nether.net
cc

Fax to

Subject
[j-nsp] Juniper M10i n00b question






Is it possible to reboot a routing engine without having to pull and
reinsert it (e.g. via the JunOS CLI)? Can't seem to find anything that 
would
suggest so.

Thanks,

Chris
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp