[j-nsp] Upgrade without PCMCIA card?

[Ivan c]

add the no-copy flag into your line

root> request system software add non-validate no-copy reboot
/var/tmp/jinstall-8.5R1.14-export-signed.tgz

cheers

On 12/20/07, chiel <chiel at gmx.net> wrote:
> Hi all,
>
> I want to upgrade a M5 from 6.2R2.4 to 8.5R1.14. But I don't have a PCMCIA card, see bellow:
>
> root> request system software add non-validate reboot /var/tmp/jinstall-8.5R1.14-export-signed.tgz
> Installing package '/var/tmp/jinstall-8.5R1.14-export-signed.tgz' ...
> Verified MD5 checksum of jinstall-8.5R1.14-export.tgz
> Adding jinstall...
>
> WARNING: This installation will not succeed.
> WARNING: The boot device is less than 256M.
> WARNING: A hardware upgrade is required.
>
> pkg_add: package /var/tmp/instmp.RJ7Ung/jinstall-8.5R1.14-export.tgz fails requirements - not installed
> pkg_add: install script returned error status
>
> root>
>
>
> Is there any way to upgrade without a PCMCIA card? I coudn't find anything on this mailing list/google.
>
> chiel
>
>
>
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>