[j-nsp] HA - SSG-550 (A/P)

[Bradford Darr]

Not sure.  What you can do though is telnet or ssh to the device, run
the "exec" command and then see the output by typing

"get log sys reverse"

Scroll to the top of output.


-----Original Message-----
From: Vincent De Keyzer [mailto:vincent at autempspourmoi.be] 
Sent: Wednesday, January 09, 2008 9:36 AM
To: Bradford Darr
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] HA - SSG-550 (A/P)

Thanks,

(taking this back after Christmas break)

do you have any idea why the output of this command is sent to the 
console only? Wouldn't it be nice to see it in your ssh session as well?

Vincent


Bradford Darr wrote:
> Try the following:
>
> exec nsrp sync global-config check-sum
>
> This will tell you whether the devices are in sync.
>
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Vincent De
> Keyzer
> Sent: Friday, December 21, 2007 6:32 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] HA - SSG-550 (A/P)
>
> Hi,
>
> I am setting up a HA pair of SSG-550 (active/passive).
>
> I can see that they are synchronized, because config changes made on
one
>
> are replicated to the other; but is what is the command to check that 
> they are synchronized (without changing the config)?
>
> Vincent
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>