[j-nsp] Bringing down interfaces (SSG-550)

[Vincent De Keyzer]

For the record, response from Juniper TAC:
1. No WebUI equivalent
2. Not possible

Lesson learned: when you receive no reply from juniper-nsp, it means 
it's not possible ;-)

Vincent


Vincent De Keyzer wrote:
> Hi,
>
> (posting again since my first message didn't seem to get through)
>
> two questions about bringing down interfaces on a SSG-550:
>
>    1. Is there a WebUI equivalent of the CLI command "set interface
>       ethernet0/1 phy link-down" ?
>    2. Is it possible to shut down a 802.1q sub-interface (while keeping
>       the physical and the other sub-interfaces up)?
>
> Vincent
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>