[j-nsp] ethernet aggregation between M5 and HP Procurve 4000M

[a. r.isnaini. rangkayo sutan]

I've done successfully the trunking on 2 fastethernet M5 ports 
aggregated with outgoing traffic 95% load balanced, the switch is 
catalyst 2924XL.

Thanks to Ariff.

rgs
a. rahman isnaini rangkayo sutan


Tim Durack wrote:
> On Jan 31, 2008 9:59 AM, Nicolaj Kamensek <nk at accelerated.de> wrote:
>> Antonio Querubin schrieb:
>>
>> Hi,
>>
>>> Anybody know if Junipers are able to do ethernet aggregation with an HP
>>> Procurve 4000M switch?  The Procurve 4000M config menu provides 3
>>> different aggregation types:  Trunk, FEC, and SA-Trunk.  Would any of
>>> these work with an M5 running JunOS 7?
>> guess "trunk" should work. Doesn't the 4000M support lacp? If you're
>> running an older procurve image, try an update which is available for
>> free at www.hewlett-packard.com.
> 
> No LACP on the old 4000s. Static trunking should work with any
> equipment (assuming the other side can be configured for a static
> trunk.)
> 
> Tim:>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
>