[j-nsp] L3 VPLS termination

[Mark Austen]

If you have a Tunnel PIC you can use logical-tunnel interfaces to link the
L3 routing-instance to the VPLS routing-instance. I don't know if there is a
way to install the logical-tunnel interface in the global routing table, if
not you may be able to export/import routes between the global table and L3
instance table.


2008/7/11 Marlon Duksa <mduksa at gmail.com>:

> Hi - is there any way I can terminate a VPLS into a global routing table.
> For example our customer is on a VPLS and we would like to provide him
> access to the Internet through the global routing table. Simply bridge him
> to the L3 interface that is in the global routing table and from there he
> can go out to the internet.
>
> Something similar to routedPW in Cisco.
>
> I'm not looking for  IRB that is applied to the bridge domain in MX but
> specifically I'm looking into a VPLS case.
> Thanks,
> Marlin
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>