[j-nsp] Tunnel Services

[Scott Morris]

Well...  Ok.  So "The tunnel pic (or built in one) serves that function as
well."  should be followed up with:  

Perform a "show chassis hardware" and make sure you have one!  :)  M5, M10,
M20, etc. don't automatically have one either!

Scott 

-----Original Message-----
From: Eric Van Tol [mailto:eric at atlantech.net] 
Sent: Tuesday, July 15, 2008 6:57 AM
To: 'swm at emanon.com'; 'Dermot Williams'; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Tunnel Services

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp- 
> bounces at puck.nether.net] On Behalf Of Scott Morris
> Sent: Tuesday, July 15, 2008 6:52 AM
> To: 'Dermot Williams'; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Tunnel Services
>
> An AS-PIC (or ASM) will terminate tunnels as well, but you don't need 
> to have it.  The tunnel pic (or built in one) serves that function as 
> well.

Actually, you do need it on an M10i, as the M7i is the only M-Series
platform with a built-in tunnel PIC.

-evt