[j-nsp] Load balancing: hash algorithm

[david.roy at orange-ftgroup.com]

Hi,

The hash algorithm uses the source IP address, the destination IP address, the Protocol field and the Incoming Interface Index in order to generate a key. 

Regards
David 

-----Message d'origine-----
De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de samuel.gay at bt.com
Envoyé : jeudi 17 juillet 2008 10:46
À : juniper-nsp at puck.nether.net
Objet : [j-nsp] Load balancing: hash algorithm

Hi Group,

Do you know how work hash algorithm used in load balancing (only layer-3)? Is there some documentation about it?

Thanks,
Samuel 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************