[j-nsp] SecurID netscreen problem

[sunnyday]

Ok sorry

Any client in mind that supports auth?
> And how can I make the vpn work without ip address assigned to the 
> dialup user?
> I have only managed to get it to work with ip.i also used netscreen 
> remote as well besides shrewsoft.

-----Original Message-----
From: Stefan Fouant [mailto:sfouant at gmail.com] 
Sent: Monday, July 21, 2008 5:11 PM
To: sunnyday; Juniper-Nsp; nn at compsoc.com
Subject: Re: [j-nsp] SecurID netscreen problem

If I recall correctly, you are using Xauth. As I mentioned in a
previous post, ScreenOS does not support the assignment of remote
settings such as IP addresses using Xauth. In most cases you do not
need to assign an address to the tunnel in order to get the tunnel
operational, but if this is a requirement for your network you'll need
to switch from that ShrewSoft client to something else that supports
AUTH authentication.

HTHs.



On 7/21/08, sunnyday <cscosunny at gmail.com> wrote:
> I have set up a vpn to authenticate to an external SecureID server the
> authentication requests reach the server and authentication is successful
as
> I can see through the logs of the SecureID server
>
> But my problem is that the dialup vpn client is unable to get an ip
address.
> How it possible to give the vpn client an ip address?
>
> Thank you
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from Gmail for mobile | mobile.google.com

Stefan Fouant
Principal Network Engineer
NeuStar, Inc. - http://www.neustar.biz
GPG Key ID: 0xB5E3803D