[j-nsp] min req on M20 to run 9.1

[Vineet Venugopal]

Hi Marlon

The output of "show system storage" should give some idea regarding
the memory space available.

also try running the validate command and check the error you observe

request system software validate <pathname>

Thanks
Vineet

On 7/23/08, Marlon Duksa <mduksa at gmail.com> wrote:
> Hi - I'm trying to upgrade an older M20 from Jun8.4 to 9.1 and this is the
> message I get.
> What boot device is in question here? I'm doing the upgrade from the hard
> disk and not the install media. Is there any way to see this boot device by
> show cmd?
>
> Installing package '/var/tmp/jinstall-9.1R2.10-domestic-signed.tgz' ...
> Verified jinstall-9.1R2.10-domestic.tgz signed by PackageProduction_9_1_0
> Adding jinstall...
>
> WARNING: This installation will not succeed.
> WARNING: The boot device is less than 256M.
> WARNING: A hardware upgrade is required.
>
> ERROR: jinstall fails requirements check
> ERROR: jinstall-9.1R2.10-domestic-signed fails post-install
>
> [edit]
> root at m20-nemo# run request system reboot
>
> Thanks,
> Marlin
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
  ---Vineet