[j-nsp] Routing question

[sunnyday]

And lets say you configure 2 static routes for the route 1.1.1.1 one for
each interface and no preference added to the static routes.
What will happen then?

-----Original Message-----
From: Nalkhande Tarique Abbas [mailto:ntarique at juniper.net] 
Sent: Thursday, July 24, 2008 12:35 PM
To: sunnyday; Juniper-Nsp
Subject: RE: [j-nsp] Routing question


With no dynamic routing involved. The election of path should be based
on static entries for the concerned routes.

Thanks & Regards,
Tarique A. Nalkhande
Juniper Technical Assistance Center 
888.314. JTAC (888.314.5822) Toll Free 
408.745.9500 Domestic & International
Email : - ntarique at juniper.net
Please CC: support at juniper.net, with the case number in the subject
line.
Working hours: Tuesday to Saturday ( 05:00 hrs to 13:00 hrs GMT )

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of sunnyday
Sent: Thursday, July 24, 2008 2:40 PM
To: 'Juniper-Nsp'
Subject: [j-nsp] Routing question

Hello im going to ask a stupid question guys.

 

 

I have 2 paths to a route one is fast Ethernet and one is serial and no
routing protocol is present

Which interface will be selected?

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp