[j-nsp] Routing question

[Jonathan Crawford]

iirc, If you don't have a load-balancing policy and unless you use qualified-next-hop to set metrics or preferences for the individual next-hops, then any of the valid(reachable) next-hops will be chosen to be installed in the fib (yes, random chance).

Disclaimer: I have balancing policies configured on all my junipers, so this is totally from memory (which is vauge sometimes).

-jj

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Boyd, Benjamin R
Sent: Thursday, July 24, 2008 6:34 AM
To: sunnyday; Nalkhande Tarique Abbas; Juniper-Nsp
Subject: Re: [j-nsp] Routing question

Only one will be installed in the forwarding table unless you have
configured a load-balancing policy.

-Ben

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of sunnyday
Sent: Thursday, July 24, 2008 4:40 AM
To: 'Nalkhande Tarique Abbas'; 'sunnyday'; 'Juniper-Nsp'
Subject: Re: [j-nsp] Routing question

And lets say you configure 2 static routes for the route 1.1.1.1 one for
each interface and no preference added to the static routes.
What will happen then?

-----Original Message-----
From: Nalkhande Tarique Abbas [mailto:ntarique at juniper.net]
Sent: Thursday, July 24, 2008 12:35 PM
To: sunnyday; Juniper-Nsp
Subject: RE: [j-nsp] Routing question


With no dynamic routing involved. The election of path should be based
on static entries for the concerned routes.

Thanks & Regards,
Tarique A. Nalkhande
Juniper Technical Assistance Center
888.314. JTAC (888.314.5822) Toll Free
408.745.9500 Domestic & International
Email : - ntarique at juniper.net
Please CC: support at juniper.net, with the case number in the subject
line.
Working hours: Tuesday to Saturday ( 05:00 hrs to 13:00 hrs GMT )



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of sunnyday
Sent: Thursday, July 24, 2008 2:40 PM
To: 'Juniper-Nsp'
Subject: [j-nsp] Routing question

Hello im going to ask a stupid question guys.





I have 2 paths to a route one is fast Ethernet and one is serial and no
routing protocol is present

Which interface will be selected?

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



***************************************************************************************

The information contained in this message, including attachments, may contain
privileged or confidential information that is intended to be delivered only to the
person identified above. If you are not the intended recipient, or the person
responsible for delivering this message to the intended recipient, Windstream requests
that you immediately notify the sender and asks that you do not read the message or its
attachments, and that you delete them without copying or sending them to anyone else.

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp