[j-nsp] Vccv ping on l2vpns on JuniperM320

[Stacy W. Smith]

No config missing. JUNOS software does not support the required VCCV  
interface parameter sub-TLV in it's PW signaling advertisements. This  
will be supported in JUNOS 9.2R1.
--Stacy
On Jul 25, 2008, at 12:21 AM, Dinesh Bhonsle wrote:

>
> Hi,
>
> I  have  a l2vpn circuit between Juniper M320 and  Alcatel 7750 box.
> But Juniper does not seem to  send any vccv ping related parameters  
> (CC, CV)
> to alcatel.
> I have enabled control-word on both sides for the pseudowire
>
> l2circuit {
>        neighbor 192.168.1.1 {
>            interface ge-0/0/1.700 {
>                virtual-circuit-id 3000001;
>                control-word;
>            }
>        }
>    }
>
>
>
> I am I missing any config ?
>
> Regards
> Dinesh
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp