[j-nsp] Frame Relay Show commands

[Farhan Jaffer]

Hi Alain,

Yes, you are right, you are late in this thread :)

Thanks.

On 7/29/08, alain.briant at bt.com <alain.briant at bt.com> wrote:
> Hi Farhan affer
>
>  What kind of command are your tring to use on your M7i?
>
>  There are no frame-relay specific commands.
>  You will for example see the interface and DLCI with some "show interface"
>  But you will not have some "show frame-relay pvc" commands like on other vendor's router
>
>  Regards
>  Alain
>
>
>  -----Message d'origine-----
>  De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Farhan Jaffer
>  Envoyé : lundi 14 juillet 2008 09:41
>  À : juniper-nsp at puck.nether.net
>  Objet : [j-nsp] Frame Relay Show commands
>
>
>  I am using M7i with JUNOS 8.1R2.4, frame-relay basic show commands are not working on this, is there any way?
>
>  Thanks in advance.
>
>  -FJ
>
> _______________________________________________
>  juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
>