[j-nsp] Extreme Switch Hang issue

Munish Saini msaini at ixiacom.com
Tue Jun 17 07:32:23 EDT 2008


Hi Beny,

In this case the Extreme switch hangs & it needs a hard boot. The config
on juniper side is the same which you are referring to. 

You are also mentioning that it is resolved in 8.1R4, Is this published
anywhere? Can you please provide me the link.

Thanks

Munish Saini



-----Original Message-----
From: Beny D Setyawan [mailto:benyds at gmail.com] 
Sent: Tuesday, June 17, 2008 4:18 PM
To: Munish Saini; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Extreme Switch Hang issue

Hi Munish,

You Extreme hang then you need to restart the device? Or you can't
access
your Extreme because your management using one of the management vlan on
the
trunking link from juniper to Extreme?

I'd been on that problem before but it happened on aggregate-ethernet
with
lacp on it (Extreme use port sharing with dynamic flow traffic).
Sometimes I
need to restart PIC FE on my M-series with JunOS 8.0R3.4 when the
problem
occurred. The problem come up when you include the scheduler-map
statement
(at the class-of-service interfaces aeX) hierarchy level and member link
of
the aggregate-ethernet goes intermittent (up/down), traffic forwarding
on
the routing platform halts for approximately 400 milliseconds or your
Extreme port-sharing indicated ND (not distribute) (you need to
re-create
port-sharing sometimes it will help), or sometimes you need to restart
PIC
FE on juniper router based on PR from Juniper this already solved on
JunOS
8.1R4 or latest.

Thanks,
Beny D Setyawan

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Munish Saini
Sent: Tuesday, June 17, 2008 5:12 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Extreme Switch Hang issue

Hi all,

 

I am using Extreme Switch summit 400 48t (Extremeware  Version 7.5e.2.8)
connected to Juniper M7i (JUNOS Base OS boot [8.0R2.8]). I sometime see
that Extreme Switch hangs, but on juniper side none of ports is shown in
down state. Does anybody have any idea of, if it is a known issue with
any of the OS's.

 

 

Thanks

 

Munish Saini

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list