[j-nsp] NAT Port translation on JUNOS, puzzled...

Remco Bressers rbressers at signet.nl
Tue Jun 17 09:31:42 EDT 2008


Hi Stefan,

It would be great to receive a full snippet of config. Thanks!

Remco


Stefan Fouant wrote:
> I'm on my Blackberry so I can't give you the full config right now but
> you need to get rid of that 'port automatic' command as that will
> enable PAT. Give me a few minutes and I will post the rest of the
> configuration.
> 
> Stefan Fouant
> Principal Network Engineer
> NeuStar, Inc. - http://www.neustar.biz
> 
> 
> 
> On 6/17/08, Remco Bressers <rbressers at signet.nl> wrote:
>> I'm working on a NAT setup, which is actually very straightforward but i
>> still am puzzled by the services documentation from Juniper. Please help :).
>>
>> It's a J2300 with 2 interfaces, in and out. One public IP address and a
>> local subnet on the inside. I got the network translation from the
>> inside to the public ip working, but now i want to configure one single
>> port-forward to an internal host (let's say 10.0.0.1) on port 80.
>>
>> But how? On a cheap $50 router it's a point-and-click, but it's not even
>> in J-web?!
>>
>>
>> The config i have now :
>>
>>
>> services {
>>     service-set wan-service-set {
>>         nat-rules nat-set;
>>         interface-service {
>>             service-interface sp-0/0/0;
>>         }
>>     }
>>     nat {
>>         pool nat-pool {
>>             address-range low 217.21.x.x high 217.21.x.x;
>>             port automatic;
>>         }
>>         rule nat-set {
>>             match-direction input;
>>             term 1 {
>> 		from
>>                 then {
>>                     translated {
>>                         source-pool nat-pool;
>>                         translation-type {
>>                             source dynamic;
>>                         }
>>                     }
>>                 }
>>             }
>>         }
>>     }
>> }
>>
>>
>>
>> --
>> Kind regards,
>> Signet bv
>>
>>
>> Remco Bressers
>>
>> T 040 - 707 4 907
>> F 040 - 707 4 909
>> E rbressers at signet.nl
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
> 


-- 
Met vriendelijke groet,
Signet bv


Remco Bressers

T 040 - 707 4 907
F 040 - 707 4 909
E rbressers at signet.nl
altijd online? www.signet.nl


More information about the juniper-nsp mailing list