[j-nsp] Forwarding next-hop - Aggreagate Ethernet

James Flynn flynjam at gmail.com
Wed Jun 18 06:37:09 EDT 2008


Not to my knowledge.

If you are having issues with load balancing between L3 next-hops and
aggregate bundle  members (when the load is not equally distributed
between aggregate members), you might want to consider the
indexed-next-hop feature.

James

2008/6/18  <david.roy at orange-ftgroup.com>:
>
> Hi all,
>
> Is-there a command to know the exact interface within an AE that is used
> to forward a packet ? In other word, a command which gives the result of
> the hashing algorithm for a specific source/destination.
>
>
> Regards,
> David
>
>
>
> *********************************
> This message and any attachments (the "message") are confidential and intended solely for the addressees.
> Any unauthorised use or dissemination is prohibited.
> Messages are susceptible to alteration.
> France Telecom Group shall not be liable for the message if altered, changed or falsified.
> If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
> ********************************
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list