[j-nsp] IOS to JunOS config

a. r. isnaini r.sutan risnaini at netsoft.net.id
Mon Mar 17 01:01:44 EDT 2008


I'm done with Firewall & Filter with sequences policers.
All needed is time based filter rule.

Tks
a. rahman isnaini rangkayo sutan

----- Original Message ----- 
From: "a. r. isnaini r.sutan" <risnaini at netsoft.net.id>
To: "juniper-nsp" <juniper-nsp at puck.nether.net>
Sent: Friday, March 14, 2008 1:47 PM
Subject: [j-nsp] IOS to JunOS config


>> Hi,
>>
>>
>> I need to convert belows two rate-limits in one of my router interface to
>> proper JunOS configuration.
>> Any suggestion would be appreciated.
>>
>> rate-limit input access-group 100 64000 8000 8000 conform-action transmit
>> exceed-action drop
>> rate-limit input access-group 110 128000 8000 8000 conform-action 
>> transmit
>> exceed-action drop
>>
>> access-list 100 permit ip 10.10.10.0 0.0.0.255 any time-range office-hour
>> access-list 110 permit ip 10.10.10.0 0.0.0.255 any time-range
>> non-office-hour
>>
>>
>> time-range office-hour
>> periodic weekdays 8:00 to 17:00
>>
>> time-range non-office-hour
>> periodic weekdays 17:01 to 07:59
>>
>> best regards
>> a. r. isnaini rangkayo sutan
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.21.7/1328 - Release Date: 3/13/2008 
> 11:31 AM
> 



More information about the juniper-nsp mailing list