[j-nsp] isis adjacencies and isis database entries
snort bsd
snortbsd at yahoo.com.au
Fri Mar 28 15:08:47 EDT 2008
Hello, all:
Shouldn't the entries in the output of "show isis adjacency" be one-to-one relationship with the neighbor entries in "show isis database details"?
Assume r1 peers with r2, r3 and r4 in level 2 (single connection to each neighbor)
user at r1> show isis database level 2 r1.00-00 detail
IS-IS level 2 link-state database:
r1.00-00 Sequence: 0x5a92, Checksum: 0xb28c, Lifetime: 65521 secs
IS neighbor: r2.00 Metric: 10
IS neighbor: r3.00 Metric: 10
IS neighbor: r4.00 Metric: 10
...
user at r1> show isis adjacency
Interface System L State Hold (secs) SNPA
ge-1/0/0.0 r2 2 Up 18
ge-2/2/0.0 r3 2 Up 23
so-0/2/0.0 r4 2 Up 28
but in some cases, they are not. I have one router (say r1), it has adjacency with r2 (on the output of "show isis adjacency) but the r2 entry doesn't show up in the output of "show isis database details".
user at r1> show isis adjacency
Interface System L State Hold (secs) SNPA
ge-1/0/0.0 r2 2 Up 18
ge-2/2/0.0 r3 2 Up 23
so-0/2/0.0 r4 2 Up 28
user at r1> show isis database level 2 r1.00-00 detail
IS-IS level 2 link-state database:
r1.00-00 Sequence: 0x5a92, Checksum: 0xb28c, Lifetime: 65521 secs
IS neighbor: r3.00 Metric: 10
IS neighbor: r4.00 Metric: 10
...
but on r2 router, i can see r1 entry on both outputs of "show isis adjacency" and "show isis database details". also the interfaces are taking traffic between r1 and r2. Why is that?
Get the name you always wanted with the new y7mail email address.
www.yahoo7.com.au/y7mail
More information about the juniper-nsp
mailing list