[j-nsp] ISIS for mcast routing

Stefan Fouant sfouant at gmail.com
Thu May 8 11:37:47 EDT 2008

Run both protocols simultaneously.  Configure PIM/MSDP to use inet.2
for RPF, then use rib groups and policy to make sure you import your
ISIS and direct routes (but not OSPF) into inet.2.

Stefan Fouant

On Thu, May 8, 2008 at 10:59 AM, Bit Gossip <bit.gossip at chello.nl> wrote:
> Experts,
> would it be possible to run an instance of ISIS solely for multicast
> routing?
> That is: on interface A, B, C I want to run OSPF solely for unicast and
> ISIS solely for multicast?
> Thanks,
> Luca.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list