[j-nsp] SSD in M7i will not be recognized

Joerg Staedele / Trusted Network GmbH js at tnib.de
Fri May 16 13:24:00 EDT 2008


Hi Colleagues,

today i have replaced a broken HDD in a Juniper M7i router with a SSD 
(Transcend 8GB)

Every time the Router is cold started (powersupplys switched from off to 
on) the SSD is not recognized until you do a reset (pressing the reset 
button on the RE) or do an soft-reboot.

any ideas what might cause this?

Thanks in advance.

Best regards,

  Joerg


More information about the juniper-nsp mailing list