[j-nsp] M10 FEB problems (Eric Van Tol)

Andrew Degtiariov andrew.degtiariov at gmail.com
Tue May 20 02:24:11 EDT 2008

2008/5/19 Nugroho WH Adisubrata <adisubrata at gmail.com>:
> Hi Andrew,
> Your log indicate new prefix could not be installed in the feb.
> In my experience, there is no other way than restarting feb.
> You need to restart them carefully.
> Be careful, sometimes the old box didn't work properly, so you cannot remote
> it after restarting feb.
> Better if you replace with a new one like Eric said.
> Regards,

Yes, I have changed 64Mb SO-DIMM on the FEB to 512Mb SO-DIMM taken
from WS-SUP32 :-)
E-FEB see one as 256Mb, old FEB - as 128Mb. It work without problems.

Andrew Degtiariov

More information about the juniper-nsp mailing list