[j-nsp] reusing loopback 0 ip address in vrfs

[David Ball]

  I would expect it to work.  Never tried it, and dunno if it'd be
common practice, but lo0 is largely just an interface, and just as
have 2 customers come in across a tagged Gig trunk to be dumped into
separate VRFs should work, so too should the same IP in diff logical
units on lo0.  Only 1 way to find out for sure though! (commit check)

David


On 19/11/2008, cp <lists at pleasants.net> wrote:
> Does anyone see a problem or have any experiences with using the same
> loopback unit 0 IP addresses for other loopback unit in VRFs?  Is this a
> common practice?  For example, loopback unit 0 is 172.16.1.1/32 and
> lives in inet.0.  loopback 425 is 172.16.1.1/32 lives in a vrf.
>
>
>
> -Chip
>
>
>
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>