[j-nsp] Unequal-Cost Load Balancing for OSPF

[Farhan Jaffer]

No. And it's not Juniper, It is OSPF which does not support unequal cost
load balancing.

EIGRP supports this behavior by variance factor.

If EIGRP is open atandard (not Cisco proprietry) then Juniper will also
support the same feature for EIGRP.

However you can use some tricks to justify your scenario.


Farhan



On Thu, Nov 20, 2008 at 12:44 PM, Iftikhar Ahmed <iftikhar.khan at gmail.com>wrote:

> Hi,
>
>
> Does Juniper support Unequal-Cost Load Balancing for OSPF, like the way
> cisco do for EIGRP with commands like variance & maximum-paths etc stuff?
>
>
>
>
> Regards
> Iftikhar Ahmed
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>