[j-nsp] FRR MIB

[Hangu Jeong]

AFAIK, there is no FRR enterprise MIB in JUNOS yet.

You can check JUNOS ernterprise MIBs as below link.

http://www.juniper.net/techpubs/software/junos/junos93/swconfig-net-mgmt/juniper-specific-mibs-junos-nm.html#jN18D0B

-Hangu
On Thu, Nov 20, 2008 at 4:38 PM, vijaya simha reddy aedavelli <
vijay_aedavelli at hotmail.com> wrote:

> Hi Hangu,
>
>
> thanks for the reply.
>
> What ever you said just tell about whether the path has frr property or
> not.
>
> But what I need is  complete frr mib just like  cisco enterprise frr mib
> i.e (1.3.6.1.4.1.9.10.98  cmplsFrrMIB). from which I can get the detour,
> bypass tunnel etc.
>
> Regards
>
> Vijay
> ------------------------------
> Date: Thu, 20 Nov 2008 16:24:16 +0900
> From: netcops at gmail.com
> To: vijay_aedavelli at hotmail.com
> Subject: Re: [j-nsp] FRR MIB
> CC: juniper-nsp at puck.nether.net
>
>
> Hi Vijay,
>
> FRR related information is cluded in MPLS-MIB as below,
>
> mplsPathProperties OBJECT-TYPE
>     SYNTAX     INTEGER {
>                record-route(1),
>                adaptive(2),
>                cspf(4),
>                mergeable(8),
>                preemptable(16),
>                preemptive(32),
>                fast-reroute(64) <<<<
>     }
>     MAX-ACCESS read-only
>     STATUS     deprecated
>     DESCRIPTION
>         "The set of configured properties for this path,
>          expressed as a bit map.  For example, if the path
>          is an adaptive path, the bit corresponding to bit
>          value xxx is set. This field is meaningless
> unless mplsPathName is not empty"
>     ::= { mplsLspEntry 27 }
> mplsPathInfoProperties OBJECT-TYPE
>     SYNTAX     INTEGER {
>                record-route(1),
>                adaptive(2),
>                cspf(4),
>                mergeable(8),
>                preemptable(16),
>                preemptive(32),
>                fast-reroute(64) <<<<<
>     }
>     MAX-ACCESS read-only
>     STATUS     current
>     DESCRIPTION
>         "The set of configured properties for this path,
>          expressed as a bit map.  For example, if the path
>          is an adaptive path, the bit corresponding to bit
>          value xxx is set. This field is meaningless
> unless mplsPathInfoName is not empty"
>     ::= { mplsLspInfoEntry 27 }
>
> Refer to following link to get the MIB!
>
>
> http://www.juniper.net/techpubs/software/junos/junos93/swconfig-net-mgmt/mib-jnx-mpls.txt
>
> I think the MIB is supported on the current JUNOS.
>
> Regards,
> Hangu
>
> On Thu, Nov 20, 2008 at 4:01 PM, vijaya simha reddy aedavelli <
> vijay_aedavelli at hotmail.com> wrote:
>
>
> Hello all,
>
>
>  Is there any juniper FRR MIB and which JUNOS is supporting that.
>
> If any one has the information please help me.
>
> Thanks in advance.
>
> Regards
> Vijay
>
> _________________________________________________________________
> Searching for weekend getaways? Try Live.com
> http://www.live.com/?scope=video&form=MICOAL
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
>  ------------------------------
> What's on the ramp today could be on the streets tomorrow. Keep up with
> trends on MSN Lifestyle Try it! <http://lifestyle.in.msn.com/>
>