[j-nsp] radius dictionary file for Juniper VSA

Bas Haakman bas.haakman at tele2.com
Wed Oct 1 03:23:38 EDT 2008


Hi,

>From the looks of it,  it uses the JUNOSe RADIUS dictionary:

https://download.juniper.net/software/erx/9-2-0/unisphere9-2.dct

Kind regards,

Bas

juniper-nsp-bounces at puck.nether.net wrote on 01-10-2008 06:17:04:

> Does anyone have entries for Radius dictionary file for Juniper VSA,
> specifically ones on page 32 of Subscriber Access Conf guide, Junos 9.2.
> I'm using FreeRadius.
> Thanks,
> Marlon
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


******** IMPORTANT NOTICE ********
This e-mail (including any attachments) may contain information that is 
confidential or otherwise protected from disclosure and it is intended 
only for the addressees. If you are not the intended recipient, please 
note that any copying, distribution or other use of information contained 
in this e-mail (and its attachments) is not allowed. If you have received 
this e-mail in error, kindly notify us immediately by telephone or e-mail 
and delete the message (including any attachments) from your system.

Please note that e-mail messages may contain computer viruses or other 
defects, may not be accurately replicated on other systems, or may be 
subject of unauthorized interception or other interference without the 
knowledge of sender or recipient. Tele2 only send and receive e-mails on 
the basis that Tele2 is not responsible for any such computer viruses, 
corruption or other interference or any consequences thereof.


More information about the juniper-nsp mailing list