[j-nsp] RE/FEB Vitals Monitoring - Cacti

[David Sinn]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You may also want to check out these:

http://forums.cacti.net/about12792.html

Works for the J-series I had it pointed at at one point.

David

On Sep 30, 2008, at 10:24 PM, Nitzan Tzelniker wrote:

> Hi,
>
> If you are tacking about http://forums.cacti.net/about11320.html
> Try to remove these lines from the XML
>
> -                <jnxFruType>
> -                       <name>FRU Type</name>
> -                       <method>walk</method>
> -                       <source>value</source>
> -                       <direction>input</direction>
> -                       <oid>.1.3.6.1.4.1.2636.3.1.15.1.6</oid>
> -                </jnxFruType>
>
> It works for me on M10i and M120  and I don't see any reason it  
> wouldn't
> work on other platforms
>
>
> Nitzan
>
>
> On Wed, Oct 1, 2008 at 05:23, Mark Tinka <mtinka at globaltransit.net>  
> wrote:
>
>> Hi all.
>>
>> Does anyone have a pointer for some good templates for Cacti
>> that would monitor vital information on routing engines and
>> (C)FEB's, i.e., CPU utilization, memory utilization, e.t.c.
>>
>> Of particular interest, at this time, is for the M7i/M10i.
>>
>> What we've been able to dig up in the wild are templates for
>> the M20 and M160, both of which seem broken enough not to
>> work or cause additional problems in Cacti.
>>
>> All help appreciated.
>>
>> Cheers,
>>
>> Mark.
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)

iEYEARECAAYFAkjk58MACgkQLa9jIE3ZamP7dQCeMswrAqnbQqpZJUB1QuNlhZQZ
jIYAoIY8D3JYmZuCFDZQhmLxaLPPlyJi
=tl5T
-----END PGP SIGNATURE-----