[j-nsp] bridge group interfaces

[Kerry Milestone]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

As annoying as it is, i've found that many cases there are little 'gotchas' like this on screenos when dealing with
changing interface bondings, sub interfaces, zones etc.  I've taken to many times downloading the config, editing then
re-uploading.  i am slightly lucky though in that i can break a nsrp pair to do this fairly hitless on the network.

regards,
Kerry.









SunnyDay wrote:
> hello
> im using screenOS 6.1r2 ihave configured 9 bridge group interfaces (e.g
> bgroup0/0.10)
> the thing is when i try to remove one either from WebUi and CLI all of
> the interfaces disappear then you have to reboot to have normal operation.
> any ideas?
> 
> Thank you
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFI/HJi840aYY1lKXkRAi2CAJ9WbSJHf5k77pug/GOGpdKvDvmxvACgyG0r
y0xb053nP6KGJIeZU19EWjg=
=AcoZ
-----END PGP SIGNATURE-----


-- 
 The Wellcome Trust Sanger Institute is operated by Genome Research 
 Limited, a charity registered in England with number 1021457 and a 
 company registered in England with number 2742969, whose registered 
 office is 215 Euston Road, London, NW1 2BE.