[j-nsp] aggregate and generated routes

[Daniel Lete]

Hello Paul,
instead of using "from protocol aggregate", stating "from protocol ospf" would 
not do what you want?

Regards,
Daniel


"Paul Civati" wrote the following on 22/10/2008 11:50:
> "Diogo Montagner" <diogo.montagner at gmail.com> wrote:
> 
>> a common practical usage for aggregate routes is on border routers 
>> to advertise it to eBGP peers.
> 
> On a related topic..
> 
> We use aggregate routes for this but have hit one particular snag
> that we need to find a workaround for.
> 
> We have one /24 that we want to announce but the route we want to
> contribute to it is also the /24 but obviously because this is not
> smaller it isn't classed as a contributing route.  We only want
> to announce this at one location if we can see it in OSPF.
> 
> Does anyone have a good workaround for this?
> 
> -Paul-
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 

-- 
Don’t Forget to register for our 8th Annual Networking Conference
13th and 14th November 2008: http://www.heanet.ie/conferences/2008/
-
Daniel Lete Murugarren
HEAnet Limited, Ireland's Education and Research Network
1st Floor, 5 George's Dock, IFSC, Dublin 1
Registered in Ireland, no 275301  tel: +353-1-660 9040  fax: +353-1-660 3666
web: http://www.heanet.ie/