[j-nsp] How does juniper tells "particular network will be announced to all neighbors"

[harish T]

Hi ,


How does juniper tells "network A.B.C.D/M  will be announced to all
neighbors" ?

In cisco below mentioned command can be use to configure above mentioned
scenario.

*network *A.B.C.D/MBGPThis command adds the announcement network.

          router bgp 1
           network 10.0.0.0/8

This configuration example says that network 10.0.0.0/8 will be announced to
all neighbors. Some vendors' routers don't advertise routes if they aren't
present in their IGP routing tables; bgp doesn't care about IGP routes when
announcing its routes.

*no network *A.B.C.D/M

*
Does juniper support command called network ?*


Thanks
Harish



------------------------------------------------------
To accomplish great things, we must not only act, but also dream; not only
plan, but also believe.



With regards
Harish.T