[j-nsp] MIP issue

[SunnyDay]

The policy is from untrust to global with source any destination MIP
And no I dont have route.i don't understand the use of the route or what
route to configure.

-----Original Message-----
From: Stefan Fouant [mailto:sfouant at gmail.com] 
Sent: Tuesday, September 02, 2008 4:27 PM
To: SunnyDay; Juniper-Nsp
Subject: Re: [j-nsp] MIP issue

What specifically is your policy permitting and do you have a route
which resolves back to the source of those ICMP echo-requests?



On 5/31/05, SunnyDay <cscosunny at gmail.com> wrote:
> Hello
>
> I have 1 adsl interface in the untrust zone and I have configured a
loopback
> with another public ip address
>
> And made the adsl member of loopback group.(the loopback interface).
>
> I now go to the loopback interface to configure a mip.
>
> Then I configure the policy from untrust to Testing zone.
>
> When I ping from the internet I see traffic on the policy logs coming in
and
> translated to the private address but ping fails.
>
> Thanks
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from Gmail for mobile | mobile.google.com

Stefan Fouant
Principal Network Engineer
NeuStar, Inc. - http://www.neustar.biz
GPG Key ID: 0xB5E3803D