[j-nsp] Router Reflector and L3 VPN support on same router

[Abhi]

Hey Guys

Thanks i tried i again after reading the config guides and i was able to do it.

 regards
abhijeet.c




----- Original Message ----
From: "Richmond, Jeff" <Jeff.Richmond at frontiercorp.com>
To: Abhi <vyaaghrah-eng at yahoo.com>; Juniper Puck <juniper-nsp at puck.nether.net>
Sent: Friday, September 19, 2008 7:59:47 PM
Subject: RE: [j-nsp] Router Reflector and L3 VPN support on same router

How did it fail? I do this without issue. You might want to check your IBGP next-hop policy though if your problem is just missing routes. Also, if you have an RR client, make sure you add a static discard route in inet.3 or a 1-way LSP from the RR server to the client.

Regards,
-Jeff
________________________________________
From: juniper-nsp-bounces at puck.nether.net [juniper-nsp-bounces at puck.nether.net] On Behalf Of Abhi [vyaaghrah-eng at yahoo.com]
Sent: Friday, September 19, 2008 6:08 AM
To: Juniper Puck
Subject: [j-nsp] Router Reflector and L3 VPN support on same router

Hi Every Body

I am configuring Juniper router in a Lab Setup i am able to establish full mesh connectivity will configuring router to support L3 VPN functionality with other 3 router by explicitly configuring them. i tried configuring one of the Router to be RR and simultaneously be a peer for L3 VPN peer.

It failed to work in this manner.

1) Can we do this if yes how. I know this would not have a practical application but we need to test the same.

regards
abhijeet.c
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp