[j-nsp] j series query not answered on the KB

[Andrew Jimmy]

Hi do you have any real time example for Junos scripting. Run ping checks
and change static route based on result. If yea, can you please share the
code and the way it works.....


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Patrik Olsson
Sent: Tuesday, April 07, 2009 7:47 PM
To: Nick Ryce
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] j series query not answered on the KB

Hello!

1. There is a standard which even Cisco supports called BFD. That tracks
routes from all protcols including static routes. So if the other end
supports BFD, that settles it.

2. Dynamic routing using OSPF/ISIS/BGP?

3. Junos scripting. Run ping checks and change static route based on result.


Cheers
Patrik

> Hi there,
> 
> I have predominantly used cisco and have recently forayed into the land of
juniper and have the following question regarding a J2320 with junos 9.
> 
> I have a j2320 with a 100meg metro ethernet connected on interface 0 with
a /30 link subnet (for example 10.0.0.0./30) this is also the default
gateway.
> Interface 1 is connected to a 10meg metro Ethernet with a /30 link subnet
(10.0.1.0/30).
> 
> What I am looking to do is have everything go across the 100meg link and
if that goes down then route through the 10 meg.  The only problem is that
on interface 0 the link may not show as down as the provider connection is
through a switch and the fibre behind that may break.
> 
> In cisco land I would use object tracking and set up a rule to ping the
default gateway on interface 0 and when that became unreachable then it
would automagically failover.
> 
> The juniper kb gives reference to track-ip but it doesn't seem to be avail
on j series routers.
> 
> Any help appreciated.
> 
> Nick
> 
> 
> ________________________________
> --
> 
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted. Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison and nPlusOne.
> Finally, the recipient should check this email and any attachments for the
> presence of viruses. Lumison and nPlusOne accept no liability for any
> damage caused by any virus transmitted by this email.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp