[j-nsp] clear firewall log

[Truman Boyes]

This appears to be the  PFE firewall on a M/T/MX series....


On 14/04/2009, at 4:49 AM, Murphy, Jay, DOH wrote:

> What model firewall is this to begin, and ?
>
>
> Jay Murphy
> IP Network Specialist
> NM Department of Health
> ITSD - IP Network Operations
> Santa Fe, New Mexico 87502
> Bus. Ph.: 505.827.2851
>
> "We move the information that moves your world."
>
>
>
>
>
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Bit Gossip
> Sent: Monday, April 13, 2009 2:51 AM
> To: Juniper List
> Subject: [j-nsp] clear firewall log
>
> Experts,
> do you know if it is possible and how to clear the firewall log that  
> is
> shown by:
> 'run show firewall log detail'
> Thanks,
> bit
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> ______________________________________________________________________
> This inbound email has been scanned by the MessageLabs Email Security
> System.
> ______________________________________________________________________
>
>
> Confidentiality Notice: This e-mail, including all attachments is  
> for the sole use of the intended recipient(s) and may contain  
> confidential and privileged information. Any unauthorized review,  
> use, disclosure or distribution is prohibited unless specifically  
> provided under the New Mexico Inspection of Public Records Act. If  
> you are not the intended recipient, please contact the sender and  
> destroy all copies of this message. -- This email has been scanned  
> by the Sybari - Antigen Email System.
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>