[j-nsp] EIGRP

[Murphy, Jay, DOH]

Will someone from Juniper confirm that your product line does not support EIGRP or IGRP for that matter?  An open standard IGP is required/needed to allow for various network elements to speak with one another.  We use EIGRP in our net, and will begin using Juniper in our core versus the incumbent hardware in place now. I understand injecting via redistribution, however, will this apply here, when our network becomes homogenized with Cisco at the distribution, and Juniper at the core. Is the solution moving to OSPF, an open standard IGP; in order to create continuity for routing and standardization, versus EIGRP, which would create more overhead, and some complexity by using both?  I guess this is predicated upon whether or not Juniper supports EIGRP out of the box.


Jay Murphy 
IP Network Specialist
NM State Government
 
IT Services Division
PSB - IP Network Operations 
Santa Fé, New México 87502 
Bus. Ph.: 505.827.2851
"We move the information that moves your world." 
P Please consider the environment before printing e-mail







































Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System.