[j-nsp] EIGRP

[Murphy, Jay, DOH]

Thanks Steiner,

This is a realized truth. I knew that Juniper did not support EIGRP, or
IGRP. This thread was rhetorical at best. I just needed some external
reflection from the forum.  Thanks dude.


Jay Murphy 
IP Network Specialist 
NM Department of Health 
ITSD - IP Network Operations 
Santa Fe, New Mexico 87502 
Bus. Ph.: 505.827.2851

"We move the information that moves your world." 






-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no] 
Sent: Wednesday, April 15, 2009 2:47 PM
To: Murphy, Jay, DOH
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] EIGRP

> Will someone from Juniper confirm that your product line does not
  support EIGRP or IGRP for that matter?

You can find out this for yourself by reading the manuals. Here is the
main page for the latest version of JunOS, 9.5:

     http://www.juniper.net/techpubs/software/junos/junos95/index.html

Go to the "Routing Protocols", and look at contents in the left hand
frame. Observe the complete lack of any mention of IGRP or EIGRP. Your
IGP choices are OSPF or IS-IS. Possibly RIPv2 if you're a masochist...

Steinar Haug, Nethelp consulting, sthaug at nethelp.no

______________________________________________________________________
This inbound email has been scanned by the MessageLabs Email Security
System.
______________________________________________________________________


Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System.