[j-nsp] origin of bgp routes with juniper

[Servet Erkün]

Hi ,I think ; If you redistrubute your networks under BGP config
these routes origin become incomplete , this is normal behavoir of cisco
routers and it is different from Junipers
If you want to avoid this issue , you can set origin manually by route-map.
Regards
servet


----- Original Message ----- 
From: "shariq qamar" <shariq.qam at gmail.com>
To: <juniper-nsp at puck.nether.net>
Sent: Friday, April 17, 2009 12:03 PM
Subject: [j-nsp] origin of bgp routes with juniper


> Hi Techies ,
>
> i have doubt on the origin of route which we learn from juniper routers .
> i believe juniper router tag only one origin on all the routers which they
> are learning from connetced BGP neighbours
> it can be either , egp , incomplete or igp , by default it is igp .
>
>
> anybuddy have any idea on this , because in cisco router  origin by 
> default
> never changes and it shows you prefixes with different
> origin with which they belongs , but in juniper i didnt find this .
>
> any comments ????????
>
>
>
>
> -- 
> Regards,
> Shariq Qamar,
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp