[j-nsp] Nantech-juniper-pb

[Mohamed Jrad]

Hi

There is no option for configuring Nantech TrafficGen  to negotiate
inet-multicast.
The only think Ican do in Nantech is to put the source address, the
destination address, the local AS and the peer-AS.

Thanks

2009/4/17 Chuck Anderson <cra at wpi.edu>

> On Fri, Apr 17, 2009 at 12:11:42PM +0100, Mohamed Jrad wrote:
> > I want to use nantech trafficgen to generate thousands of BGP routes.
> >
> > “Nantech trafficgen is a software which work on windows, it can generate
> > thousands of BGP updates with different attributes “
> >
> > The router with which I work is an M120 router.
> >
> > The junos version is 9.1R1.8.
> >
> > The problem that I encountered is that when I start generating  updates
> the
> > M120 router turn down the BGP session, it send “bgp_read_v4_update:7824:
> > NOTIFICATION sent to 11.11.11.12 (External AS 64512): code 3 (Update
> Message
> > Error) subcode 10 (bad address/prefix field), Reason: peer 11.11.11.12
> > (External AS 64512) UPDATE - NLRI inet-multicast not negotiated” please
> see
> > the entire log file enclosed.
> >
> > *NB:* I configured “family inet any” under [edit protocols bgp group
> > nanotech]
>
> The peer needs to negotiate inet-multicast before it sends multicast
> routes.  It appears to be not doing that.  Reconfigure trafficgen to
> negotiate inet-multicast as well as inet-unicast.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp