[j-nsp] firewall filter counters

[Chris Grundemann]

On Fri, Apr 24, 2009 at 01:47, Bit Gossip <bit.gossip at chello.nl> wrote:
> Experts,
> the command 'show firewall filter' shows packet counters also for policer;
> are these packets dropped by the policer?
> Thanks,
> bit.
>
> show firewall filter PIPPO
> Filter: PIPPO                                           Counters:
> Name                                                Bytes
>  Packets
> PIPPO-A                     227687334631            365808874
> PIPPO-B                           412081341899            499734020
> Policers:
> Name                                              Packets
> PIPPO-A-PIPPO-A                 1686
> PIPPO-B-PIPPO-B                   78

"Policers—Display policer information.

    * Name—Name of policer.
    * Packets—Number of packets that matched the filter term under
which the policer action is specified. This is only the number of
out-of-spec packet counts, not all packets policed by the policer."

http://www.juniper.net/techpubs/software/junos/junos73/swcmdref73-protocols/html/firewall-monitor3.html


>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Chris Grundemann
weblog.chrisgrundemann.com