[j-nsp] router protect policy

[Bill Blackford]

9.3S1.6

-b

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Chuck Anderson
Sent: Wednesday, August 05, 2009 8:42 AM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] router protect policy

On Wed, Aug 05, 2009 at 08:11:58AM -0700, Bill Blackford wrote:
> I'm trying to form a router protect policy on an EX3200 that is 
> being used as a layer3 border device receiving default routes only 
> (temporary until it's replaced by an M series). I was able to create 
> a policy that works fine for EX series running layer2 only services. 
> Are there any examples or templates to look at?

What version of JUNOS?  

>                     ##
>                     ## Warning: configuration block ignored: unsupported platform (ex3200-24t)
>                     ##
>                     source-prefix-list {
>                         NMS-NETWORKS;
>                     }

source-prefix-list works on my EX4200's running 9.5R2.7 here.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp