[j-nsp] ex4200 throughput trouble on 10GE interface

[Michael Schedrin]

I had issue with bootp helper. It had stopped forwarding packets at the
moment. Also only reboot resolved the problem.

2009/8/5 Chuck Anderson <cra at wpi.edu>

> On Wed, Aug 05, 2009 at 11:00:31AM +0200, Malte von dem Hagen wrote:
> > Hi,
> >
> > Michael schrieb:
> > > I use 9.5R2.7. Very interesting information about 9.3. Where did you
> hear
> > > about it?
> >
> > we ran into several severe bugs on our EX switches, regarding different
> > functions (aggregated ethernet, virtual chassis, spanning tree etc. etc.)
> and
> > got that recommendation from our Juniper SE. That statement is some
> weeks/months
> > old though, so I can't say if the situation changed.
>
> Interesting.  I've been using aggregated ethernet and virtual chassis
> on 9.5R2.7 without major issues since May.  Also dhcp-snooping, ARP
> inspection, IP Source Guard, and secure-access-port allowed-mac.  One
> minor issue I had was failure to save/restore the persistent
> dhcp-binding-table on reboot.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
С уважением,
Щедрин Михаил
Начальник отдела ТП2
SkyNet Telecom http://sknt.ru
тел. +7 911 934-79-83