[j-nsp] EX series VLAN filter verification

[Dan Farrell]

That seems to be applicable to interfaces, not to vlans themselves. It did not return information on the filter I've applied to a vlan itself. Maybe I'm confusing something.



Dan

-----Original Message-----
From: Harry Reynolds [mailto:harry at juniper.net] 
Sent: Tuesday, August 11, 2009 2:46 PM
To: Dan Farrell; juniper-nsp at puck.nether.net
Subject: RE: EX series VLAN filter verification

Does show interfaces filters  help?

Regards


 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Dan Farrell
Sent: Tuesday, August 11, 2009 11:25 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] EX series VLAN filter verification

I've been getting closer to implementing filters on a particular EX3200 I'm using, and I noticed that the verification capabilities in the CLI for filters (specifically, where they are applied) is pretty weak. For instance, I can't find a standard way to see a list of what ports, interfaces, or vlans a particular filter is applied on. The best I can come up with is-


>show configuration | display set | match filter | match vlan

Is there way I'm missing that can give me the same (or somewhat similar) information?


Thanks,

Dan Farrell
Director of Network Operations
Applied Innovations Corp.
danno at appliedi.net

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp